Wastewater

Drainage systems are the basis for the development of any urban environment. Proper modeling and dimensioning of such systems, as well as planning the upgrade is not possible without reliable measurements. Whether it is a meather of the precipitation, level or flow measurement, even in the explosive environments, KONČAR offers state of the art solutions. In addition to measurements, we also offer systems for monitoring and control of pump stations and collectors as well as systems modeling and integration with SCADA systems.

Flow measurement

More sensor for better accuracy

Level measurement

Ultrasonic sensors with remote reading

Measurement of percipitation

Long battery life

Pumping station

“Turn Key“ solutions

Measurement cabinets

Design, mounting, testing and commissioning

Integrated solutions

From SCADA to business systems

For utilities

KONČAR AMI is made for utilities opting for increased reading accuracy and timely billing. It is a good starting point for distributed generation and renewables.

For the end user

KONČAR AMI is designed for the end user who wants to cut costs, prevent unnecessary losses and save the world.

Why choosing KONČAR AMI?

Minimum costs using long-range radio, existing GPRS or Ethernet networks
Interoperability – reading measuring equipment from different manufacturers
Integration with other information systems (Billing, main Energy Information System E2)
Web hosting possibility

Automatic generation and delivery of customized reports and alarms
Minimum CAPEX and OPEX costs
Made in EU

Technical description

KONČAR AMI consists of the following components:

KONČAR MARS

Software package for the collection, storage, processing and visualization of measurement data, all with the goal of complete control over energy consumption as a basic prerequisite for cost savings. The full functionality is available via a web browser. If opting for Web Hosting, it cuts the installation costs (no investments in servers and network equipment) and operating costs because KONČAR takes care of the maintenance for you.

Concentrator (KCT)

The modular device that collects data from meters, the Registrar or a Repeater and transmits them to MARS. To read and transfer data you can choose between 8 communication modules:

To collect the data: BeeKON basic module (IEEE 802.15.4); Wireless M-Bus, Pulse Inputs and RS-232/485 module.

To transfer data to the center: a long-range radio IEEE 802.15.4k, GPRS, Ethernet / ADSL and SD cards. In the case of data transfer to the main computer via a long-range radio, the user is exempt from licensing, as well as any costs of a telecom operator, which positions KONČAR AMI ahead of the competition.

Registrar (RGT)

The device, which is mounted next to the meter with pulse, serial or wireless M-bus output and sends them over the wireless network to a Concentrator. The data can be collected from all types of meters from different manufacturers (meter electric energy, water meters, gas meters, etc.). Using local BeeKON network with the frequency of 868 MHz, a maximum range of 1 km (LOS – Line Of Sight) and IEEE 802.15.4 protocol to communicate with the master Concentrator. RGT is powered by a built-in battery with a life expectancy greater than 5 years. For use in humid conditions (for example in manholes), the a RGT in IP68 enclosure is available.

Repeater (RPT)

Is an auxilary device used to amplify the wireless signal when the concentrator is outside the range of a RGT. It uses BeeKON network for communication and a replaceable battery with a life span greater than 5 years. It can be networked with up to 10 subunits, which significantly increases the range of KCT, ie. the range of the local network.

Long-range radio

Advanced RPMA (Random Phase Multiple Access) technology enables the reception of electromagnetic waves below the level of noise (down to -170 dBm) allowing coverage of more than 12 km with a minimum transmission power (in countries with NIST regulations and over 60 km).
The use of this system also increases efficiency and benefits:

unlimited data transfer
covering an area without gprs signal (radius> 12 km los)
4x less battery consumption compared to gprs
a lot less response time
a large number of devices per access point (> 10000)
no data transfer costs
guaranteed data security/li_item]

Make use of KONČAR AMI today and enjoy the return on investment forever.

KONČAR INEM is leading regional manufacturer of Electronics and power electronics devices and systems for Energy and transportation sectors and ICT solutions.
If you have any questions about our products, please do not hesitate to contact us!